 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Bulletin OP993 June 1996 PIN Silicon Photodiode Type OP993 Features *Wide receiving angle *Linear response vs. irradiance *Fast switching time *TO-18 equivalent package style Description The OP993 photodiode consists of a PIN silicon photodiode mounted in a dark blue plastic injection molded shell package. The wide receiving angle provides excellent on-axis coupling. The sensors are 100% production tested for close correlation with Optek emitters. Optek' packaging process provides s excellent optical and mechanical axis alignment. The shell also provides excellent optical lens surface, control of chip placement, and consistency of external package dimensions. Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Reverse Breakdown Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40o C to +100o C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260o C(1) Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2) Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. Max. 20 grams force may be applied to leads when soldering. (2) Derate linearly 1.67 mW/o C above 25o C. (3) Light source is an unfiltered GaAlAs emitting diode operating at peak emission wavelength of 890nm and Ee(APT) of 1.7 mW/cm2 average within a .250" dia. aperture. (4) This dimension is held to within 0.005" on the flange edge and may vary up to 0.020" in the area of the leads. Typical Performance Curves Relative Response vs. Wavelength Coupling Characteristics OP993 and OP293 VR = 5 V IF = 20 mA - Wavelength - nm Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 3-64 Distance Between Lens tips - inches (972) 323-2200 Fax (972) 323-2396 Type OP993 Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL IL ID V(BR) VF CT tr, tf PARAMETER Reverse Light Current Reverse Dark Current Reverse Breakdown Voltage Forward Voltage Total Capacitance Rise Time, Fall Time MIN TYP MAX UNITS 12.5 1 60 1.2 4 5 28.5 60 A nA V V pF ns TEST CONDITIONS VR = 5 V, Ee = 1.7 mW/cm2(3) VR = 30 V, Ee = 0 IR = 100 A IF = 1 mA VR = 20 V, Ee = 0, f = 1.0 MHz VR = 20 V, = 850 nm, RL = 50 Typical Performance Curves Normalized Light Current vs Reverse Voltage Total Capacitance vs Reverse Voltage Normalized Light and Dark Current vs Ambient Temperature VR = 5 V = 890 nm Normalized to TA = 25o C TA = 25o C Ee = 0 mW/cm2 f = 1 MHz TA = 25o C = 935 nm Normalized to VR = 5 V Light Current Dark Current VR - Reverse Voltage - V VR - Reverse Voltage - V TA - Ambient Temperature - oC Light Current vs. Irradiance Switching Time Test Circuit Light Current vs. Angular Displacement VR = 5 V TA = 25o C = 890 nm Test Conditions: = 935 nm VR = 5 V Distance Lens to Lens = 1.5 inches Ee - Irradiance - mW/cm2 - Angular Displacement - Deg. Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 3-65 |
Price & Availability of OP993
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |